I have an Honda 600 RR (03) and I just had the brakes done, not sure if that matters, but when I'm traveling at high speeds & apply hard front end brake the front ends shakes??? The only thing I can think of is that its out of balance? Your thoughts & comments are greatly appreciated? Corona
I am no expert, but are your rotors warped? You said you just had the brakes done, so it is probably not uneven pad wear. You didnt change the tires, so it may not be wheel balancing either. My best guess is warped rotors or loose steering head.
What does that mean? I've had what I thought was front end shakes after replacing a front tire. Turned out to be the pads weren't settled in right on the left caliber and chattered under hard braking
If i just had my brakes done wouldn't WCM let me know the rotar's are spent? I guess I'll have to take a look at it tonight..
Did they examine your rotors to see if they were the recommended thickness and if they were straight? or did they just change your brake pads for you? Like Larry asked before, what do you mean when you say you had your brakes done? If you had the work done at a shop, why not just take it back there and explain your concerns? They should stand behind their work and correct it if anything is wrong.
Glazed rotors is the easiest first diagnosis, get out the emory cloth and make hark little circles on the rotors. Cleaning all emery grit off afterword. Also try switching your rotors opposite sides do to brake pads bedding in on certain rotors. These are just easy at home first trial and error theories to try, if that doesnt work, your rotor buttons may be binded up, a good cleaning make be in order to loosen them up. Like I said, just easy first first at home little trial and error fixes, if that doesnt work upgrade to some nice aftermarket rotors, but replace pads at the same time to bed in like butter! Worth a try instead of sweating some major problem. Glazing is usually the first sign of shimmy upon braking at speed, try it, waht do have to lose, maybe as simple as that. Just a thought.
Shakes are usually the result of imperfections on the surface of the rotor... Can you post a pic of your rotors??? Out of balance condition would be present any the time the wheel is up to speed with or without brakes...
I'll try to take a pic tonight if its not too dark.. I only get that vibration/shake when braking at high speeds.. My concern is that it feels like my front end is going to wash out...
I would think that there is grease or oil on the rotors. Some one may have touched the rotors with something on there hands. You might try cleaning the rotors with brake cleaner. It could also be that if you have floating rotors that they could be dirty and need cleaning. Kurt
+1. I too have an 03 CBR 600RR. I've experienced the same thing right after I had pads and front rotors changed.