Brake Lines...

Discussion in 'Shop Talk' started by G Money, Oct 21, 2009.

?

Will SS lines on the 636 minimize brake fade at track speeds?

  1. Yes

    30.8%
  2. No

    69.2%
  1. G Money

    G Money "OG" SCR Member SCR Contributor

    Joined:
    Oct 12, 2009
    Messages:
    3,921
    Location:
    South Sac
    First Name:
    G.
    Your bike:
    Whatever you give me
    Hey all, I know that SS lines are definitely the way to go over stock brake lines. My question to you out there that have experience with Kawi's, will these SS lines get rid of / minimize the brake fade that I know the Kawi's get on the track? I know a part of this comes from the calipers heating up and heating up the brake fluid etc, and the other aspect is the master cylinder itself. I do plan on swapping out fluid to some top notch motul or equivalent.

    I have a set of brake lines lined up, but I'm just not sure if I want to pay the extra coin to get them here to install them before the track on Nov 2nd.

    Thoughts?

    P.S. I know that E! has lots of problems with fade on his zx10 and his bike and my 636 have the same master cylinder etc. I know I'm not going to be clipping the track at "Racer X" speeds, but trying to get down and dirty without actually getting down and dirty ya know? LOL
     
  2. G Money

    G Money "OG" SCR Member SCR Contributor

    Joined:
    Oct 12, 2009
    Messages:
    3,921
    Location:
    South Sac
    First Name:
    G.
    Your bike:
    Whatever you give me
    Again, my question is NOT based on upgrading the lines because I will be doing that. My question centers around reducing brake fade for the track day Nov 2, and if its worth the extra money to get the lines before Nov 2. I'll be riding C group speeds.
     
  3. stoppie

    stoppie Time for a nap SCR Contributor

    Joined:
    Oct 12, 2009
    Messages:
    3,743
    Location:
    Roseville
    First Name:
    carl
    Your bike:
    KTM525 DL1000 crf50
    It's o.k.

    Your stockers will be fine for group c pace, no problem.
     
  4. of course brake fading is a combination of all the brake items under heat and stress
     
  5. RacerX (aka E!)

    RacerX (aka E!) ARC Trackademics -

    Joined:
    Oct 12, 2009
    Messages:
    5,157
    Location:
    NorCal
    First Name:
    E
    Your bike:
    ZX10R
    Brake Fade and Brake Feel are two differen things. Your stockers will be more than enough..... For the 5th time! LOL. Sounds like you're looking for justification to buy something.... I won't tell Lisa. :)
     
  6. Faster145

    Faster145 Guest

    I had a 636 and I can tell you I had much better feel. with the stock lines brake pull got soft as the day went on and with steel it was much better..

    Then I got the Glafer High Carbon OMG SBK wave rotors.. WOW best brakes I have ever had

    [​IMG]
     
  7. G Money

    G Money "OG" SCR Member SCR Contributor

    Joined:
    Oct 12, 2009
    Messages:
    3,921
    Location:
    South Sac
    First Name:
    G.
    Your bike:
    Whatever you give me
    Sounds like I just found another $500 item to add to the wish list... THANKS GUYS!

    :banghead:
     
  8. G Money

    G Money "OG" SCR Member SCR Contributor

    Joined:
    Oct 12, 2009
    Messages:
    3,921
    Location:
    South Sac
    First Name:
    G.
    Your bike:
    Whatever you give me
    SHHHH!!!!

    Whats wrong with wanting the best components for your bike? Besides, I need all the help I can get if I ever want to keep up with you guys.
     
  9. Faster145

    Faster145 Guest

    Sorry dude but The rotors were $395 ea!! plus pads and it was just under a Grand

    But money well spent!!
     
  10. Cody

    Cody Founding Member / Admin Staff Member SCR Contributor

    Joined:
    Oct 8, 2007
    Messages:
    47,002,584
    Location:
    Folsom
    First Name:
    Cody
    Your bike:
    GSXR1000/CBR1000RR/CRF450
    Regardless of speed you ALWAYS need good brakes. I would say that just re-bleeding them might help but if you are going to do that you might as well swap out the lines at the same time.
    Mike J. might know the answer to this. PM him.

    -Cody
     
    Last edited by a moderator: Oct 21, 2009
  11. Cody

    Cody Founding Member / Admin Staff Member SCR Contributor

    Joined:
    Oct 8, 2007
    Messages:
    47,002,584
    Location:
    Folsom
    First Name:
    Cody
    Your bike:
    GSXR1000/CBR1000RR/CRF450
    If you want to keep up with those guys, take your brakes OFF and tape your throttle wide open. Make sure you have "Lifeflight" insurance before you do this.

    -Cody
     
  12. drftsub

    drftsub Guest

    dude do it.
    mine made a difference, but of course your stockers will function, but who wants just functioning ;)
     
  13. RacerX (aka E!)

    RacerX (aka E!) ARC Trackademics -

    Joined:
    Oct 12, 2009
    Messages:
    5,157
    Location:
    NorCal
    First Name:
    E
    Your bike:
    ZX10R
    There is truth to that. Less time on the brakes and more time on the gas equals lower lap times. Eventually you'll scrub off speed by sliding the front end....brakes are for whimps! J/k
     
  14. Cody

    Cody Founding Member / Admin Staff Member SCR Contributor

    Joined:
    Oct 8, 2007
    Messages:
    47,002,584
    Location:
    Folsom
    First Name:
    Cody
    Your bike:
    GSXR1000/CBR1000RR/CRF450
    I'm a wimp. Luckily both my bikes have decent stock brakes/lines.

    -Codt
     
  15. RacerX (aka E!)

    RacerX (aka E!) ARC Trackademics -

    Joined:
    Oct 12, 2009
    Messages:
    5,157
    Location:
    NorCal
    First Name:
    E
    Your bike:
    ZX10R
    I wish I had brakes. My 95 gixxer had twice as much stopping power as my 05 ninja. Never faded and was strong enough to lift the rear at tripple digit speeds with only two fingers. I miss havin brakes, but now I just try to brake less and push harder on corner entry. I haven't justified any upgrades for my bike because it's not competitive. Fun street bike though. Don't need brakes for wheelies, jumps and power slides
     
  16. Faster145

    Faster145 Guest

    The Brakes on my Duc are great but I have to say that having the brakes on my 636 then going into T-1 at Button willows was an amazing experience... love great breaks.. it fits my style of Break hard, turn quick, then gas!
     
  17. RacerX (aka E!)

    RacerX (aka E!) ARC Trackademics -

    Joined:
    Oct 12, 2009
    Messages:
    5,157
    Location:
    NorCal
    First Name:
    E
    Your bike:
    ZX10R
    +1 great place for brake check!
     
  18. racercosmo

    racercosmo Guest

    Open throttle Fookin Poosie!!!

    I vote no. I do believe braided lines improve your brake feel at the track, but they will not prevent brake fade.
     
  19. It's getting near Halloween. Best time to bleed them brakes.
     
  20. Mr. Steel

    Mr. Steel SCR Contributor SCR Contributor

    Joined:
    Oct 13, 2009
    Messages:
    2,171
    Location:
    Carmichael
    First Name:
    John
    Your bike:
    Gsxr 1000
    If your fluid is contaminated, that will add to the brake fade. Best way to reduce fade is to reduce temp. Reduce temp with LESS braking and you're good to go! LOL!